Automatic PET Bottle Making Machine/equipment
Informations de base
Modèle: HYG-4
Description du produit
Automatic bottle blow molding machinery/line
Machine Features:
1.Stable performance with advanced PLC.
2.Conveying preforms automatically with conveyor.
3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area and eternal temperature in the preheater with an automatic thermostatic apparatus.
5.High safeties with security automatic-locking apparatus in each mechanical action,which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8.Strong clamping force with high pressure lock the mold.
9.Two ways of operating: automatic and manual.
10.Safe,reliable and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11.Low cost,high efficiency,easy operation,easy maintenance,etc,with automatic technological process.
12.Contamination is avoided for the bottle body.
13.Ideal effect of the chilling with the chilling system.
14.Easy installation and starting.
15.Low rejection rate:less than 0.2 percent.Machine
Technique Parameter of blow molding machine
Model |
HYG-4 |
|
Productivity |
Depend on bottle design |
3200-4000PCS/H |
Product type |
Body diameter |
20mm-100mm |
Height |
50mm-350mm |
|
Neck diameter |
15mm-38mm |
|
Mold |
Cavity |
4cavities |
Mold thick |
240mm |
|
Mold |
500*500mm |
|
Main machine power |
Electrical source power |
380v 3Phase /220v 3Phase 50/60HZ |
Rated Power |
49kw |
|
Really use power |
14kw |
|
Air source |
LP air compressor |
1.6m3/min 1.0MPa 1set (15KW) |
HP air compressor |
1.0m3/min 3.0MPa 2sets (each set 11KW) |
|
Air dryer |
2.0m3/min 3.0MPa 1set |
|
Cooling water |
Cooling water |
15L/min |
Size |
L*W*H |
1908*1858*1920mm |
Weight |
3600kg |
|
Auxiliary equipment (preform unscrambler) |
L*W*H |
2000*950*2480mm |
Weight |
250kg |
|
Resin available |
|
PET |
1. 2 year's quality guarantee
2.Our techncians are availble to go to customer's plant for installation,trial run and free trainning
3.24hours technical support by e-mail or by camera video tools
4.spare parts are available by courier at any time if neccessary
5.manual books and detailed Videos are available
Groupes de Produits : Machine de soufflage de bouteilles en plastique
Premium Related Products